- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
海绵压缩变形试验箱
-
海绵压缩变形试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵落球回弹试验仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压陷硬度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩蠕变测试仪
-
海绵空气透气率测试仪
-
海绵往复冲击疲劳试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫缓冲能量试验机
-
落球回弹试验仪,介电击穿强度测定仪:2000-海绵拉伸撕裂试...
-
1000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:慢回弹泡沫复原时间测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
- 粉末测试设备
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高相电压小工作电流实验装置仪(耐电孤实验装置仪)-(计算机程序把握)
High voltage low current tester (arc resistance tester) - (computer control)
企业产商品编码称:耐电弧试验机
Product name: electric arc resistance tester
服务具体型号:NDH-A
Product model: NDH - A
考虑标:GB/T 1411-2002《固态隔绝食材耐高降低瞬时电流电孤充放的实验》(等一起IEC 61621-1997)及ASTM D495等规范标准的要设计方案生产加工的,并不符合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
最主要符合范围图及特点:
本测试软件机是确定应用软件于电机马达、电落球回弹试验仪,介电击穿强度测定仪和家装电落球回弹试验仪,介电击穿强度测定仪等职业的电工作业用泡沫pp塑料、光敏硅胶粘合剂胶和隔热层漆等隔热层素材的耐电孤功效指标评定标准,主使用在混合物隔热层素材如:泡沫pp塑料、透明膜、光敏硅胶粘合剂、矿石、陶瓷制品、安全玻璃、隔热层油、隔热层漆、纸箱等有机溶剂的耐电孤功效指标测试软件;
本耐压材料试验机由估算机的控制运作,都可以提示某个工作所情况下及工作所时长,工作所终止后并存有某个工作所大数据,并可打印出.规则调查报告范文。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该设备为前后左右二合一成分,下面为操作方法体系,上半部为试验装置箱。
2 本好产品适用*新智能化操作方法,可以通过选定过程(IEC或ASTM)可自动化完成试验台,并在手提电脑上微信提示 实验的过程和最终结果。
3 **性能指标优秀,抗打扰力量强,自测定位精较高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电孤通断时偏差:高于 ±10ms
2 调压器储电量:2kVA
3 额定容量试验报告直流电压:12.5kV
4 测试电阻高精准度:±3%
5 电流大小调整误差:±10% 工作电流预估定位精度:1.5%
6 探针对制样压力差:(0.5±0.05)N
7 电极原材料原材料:钨棒
8 金属电极长度:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 食用生态环境溫度:(23±2)℃
10 采用情况室内湿度:(50±5)%
11 电原:220V±5% 50Hz
12 实验室检测 技巧: 标准/美标/10 mA 间隔/20 mA 连着/30 mA多次/40 mA间断性
13 实验室检测系统软件以下的:
| 程序代码段 | 电弧焊接感应电流 mA | 焊弧通断时期s | 各系统软件段延续时候s | 试验装置总时光s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 联续通 | 60 | 240 | |
| 5 | 20 | 间隔通 | 60 | 300 | |
| 6 | 30 | 间隔通 | 60 | 360 | |
| 7 | 40 | 持续通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 编号 | 明称 | 总数量 | 注 |
| 01 | 耐电孤测试英文仪 | 1台 | |
| 02 | 参比电极整体 | 这套 | |
| 03 | 工业支架 | 一个 | |
| 04 | 电压缆线 | 整套 | |
| 05 | 跨接放** | 1支 | |
| 06 | 电流值毫安表 | 两台 | |
| 07 | 电脑主机测控工具 | 一项 | |
| 08 | 试板架 | 一套 | |
| 09 | 金属电极长度细则块 | 2块 | |
| 10 | 视场角的标准块 | 2块 | |
| 11 | 陶瓷厂家片 | 2片 | |
| 12 | 喷墨彩喷机机 | 1台 | 茶叶品牌 |
| 13 | 算起机 | 1台 | 厂家 |
| 14 | 运行表明书 | 1份 | |
| 15 | 适合证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 產品技术参数:
NDH-A 耐电弧放电校正仪-微机控住
NDH-B 耐脉冲经过多次实验发现仪-摸屏调节
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!